Kia Soul EV: Body Side Moulding / A Pillar Garnish Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / A Pillar Garnish Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting screw, remove the A pillar garnish (A) using a screw driver.
   
Replace the A pillar garnish with a new one.

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Fender Garnish Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Front Wheel Guard Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: General Information


Lift And Support Points     When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place additional weight in the luggage area before hoisting. When substantial weight is removed from the rear of the vehicle, ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Yaw-rate and Lateral G Sensor Repair procedures


Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning to work. 3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors. 4. Remove the floor console. (Refer to Body - "Floor console") 5. ...

Copyright © www.ksoulev.com 2020-2022