Kia Soul EV: High Voltage Battery Control System / Battery Temperature Sensor Schematic Diagrams

Battery Temperature Sensor Description and Operation

Description Installed in the high voltage battery module, Battery Temperature Sensor transfers temperature of each battery module to BMS ECU. ...

Battery Temperature Sensor Repair procedures

Installation     Battery temperature sensor can not be disassembled. 1. Turn the ignition switch OFF. 2. Shut off the high voltage. (Refer to Battery Control Syste ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Rear Pillar Trim Repair procedures

Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Us ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Side Airbag (SAB) Module Repair procedures

Removal     The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag. 1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning to work. 2. Remove the front passen ...