Other information:
Inspection
High voltage battery heater temperature sensor is installed in modules No. 1 and No. 8.
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Procedure")
3.
Remove the high volt ...
Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
After the display panel flickers three times every 0.5
second, the corresponding fault code flickers on the setup temperature
display panel every 0.5 second and will show two figures. Codes are
displayed in n ...