Other information:
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant cover (A).
3.
Disconnect the power door mirror connector (A) from the harness.
4.
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
...
Inspection
Check that the brake pedal operates smoothly.
Brake Pedal Height and Stop Lamp Switch clearance Adjustment
1.
Disconnect the stop lamp switch connector (A).
2.
Adjust the brake pedal height (A) as illustration below.
Pedal height (A): 174.2 mm (6.86 in)
Full stroke (C): 108 ...