Kia Soul EV: Rear Seat Belt / Rear Seat Belt Buckle Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Buckle Repair procedures

Replacement
[LH]
1.
Detach the rear seat belt lower anchor (C) by pushing the lock pin (B) of center mini buckle (A) with flat-tip driver.

2.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
3.
Loosen the mounting bolt, and then remove the rear seat belt buckle [LH] (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
[RH]
1.
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
2.
Loosen the mounting bolt, and then remove the rear seat belt buckle [RH] (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
Rear Seat Belt Buckle Components and Components Location
Component Location 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] ...

Roof Trim
...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Cowl Side Trim Components and Components Location


Component Location 1. Cowl side trim ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Pre-Charge Registor Description and Operation


Description Pre-Charge Resistor is installed in the Power Relay Assembly (PRA) and it protects the high voltage circuit by limiting the charging current when the inverter capacitor is being pre-charged. [With High Voltage Battery Heater System] 1. Main Relay (+)2. Main Relay (-)3. Pre Cha ...

Copyright © www.ksoulev.com 2020-2021