Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration, and replace if necessary.
1.
Remove the front door trim.
(Refe ...
Component Location
1. Driver power window main switch2. BCM (Body Control Module)3. Door lock switch4. Front door lock actuator & switch5. Rear door lock actuator & switch6. Tailgate lock actuator & switch
...
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.(Refer to Body - “Floor console assembly")
3.
Disconnect the EPB control unit mounting nuts and then remove EPB control unit.
Tighten torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...