Kia Soul EV: Body Side Moulding / Fender Garnish Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Fender Garnish Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Using a screwdriver or remover, remove the fender garnish (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Roof Side Moulding Repair procedures

Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protec ...

A Pillar Garnish Repair procedures

Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protec ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Tail Gate Lift Repair procedures

Replacement • Take care to not let the tail gate fall on you as the lifts are removed. Have a helper hold the tail gate open, or use a secure method to hold it open. 1. Using a screwdriver (A), lift up slightly the socket clips (B) of both ends on ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Receiver-Drier Repair procedures

Replacement [Without Heat Pump] 1. Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser. Tightening torque : 9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 2. Remove the desiccant (A) from the condenser using a long nose plier. Che ...