Kia Soul EV: Body Side Moulding / Roof Side Moulding Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Side Moulding Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the roof side moulding (A).
   
Replace the roof side moulding with a new one.

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Body Side Moulding
...

Fender Garnish Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Audio Unit Repair procedures


Removal     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Use a plastic panel ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Wheel Speed Sensor Repair procedures


Removal 1. Remove the front wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the front wheel speed sensor mounting bolt (A). Tightening torque: 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft) 3. Disconnect the front wheel ...

Copyright © www.ksoulev.com 2020-2021