Other information:
Description
Main Relay is installed in the Power Relay Assembly (PRA) and it controls the high voltage line.
It connects the power between the high voltage battery pack and the high voltage joint box by the BMS ECU control signal.
But when the battery cell is swollen by overcharging, main relay ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using the flat screw driver or remover, remove the crash pad center air vent panel (A).
3.
Disconnect the hazard switch connector (A).
4.
Remove center fascia upper panel (A) after loosening the mounting screws.
5.
Disco ...