Charge port consists of normal charge port (1) and the rapid
charge port (2) in the front of vehicle. The charge starts when the ICCB
or the quick charge coonnector is connected to charge port.
Description
Rapid charge charges the battery using high voltage on a quick charge stand.
The electric power goes directly to the battery through the
rapid charge port. To protect the battery, it ...
Removal
•
Be sure to read and follow the “General Safety Information
and Caution” before doing any work related with the high voltage
system. Failure t ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminals "1" and "2" of the evaporator temperature sensor.
4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn ...
Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable.
3.
Check for continuity between the outer poles of antenna cable. There should be continuity.
4.
If there is no continuity, replace ...