Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the negative (-) battery terminal.
3.
Verify that the auto defogging actuator operates to the open
position when 12V is connected to terminal 3 and ground to terminal 4.
Verify that the auto defogging actuator operates to the c ...
Special Service Tools
Tool Name / NumberIllustrationDescriptionHigh Voltage Power Extension Cable0K918-E4100Used for measuring the high voltage battery systemHigh Voltage Battery Check Extension Cable (21pin)0K375-E4100Used for measuring the high voltage battery systemHigh Voltage Battery Check ...