Kia Soul EV: High Voltage Battery Control System / Battery Management System (BMS) ECU Specifications

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Control System / Battery Management System (BMS) ECU Specifications

Specification

Item	Specification	Remark
C-CAN terminating resistance (?)	Approx. 60	Combined resistance (BMS ECU-Inverter)
C-CAN terminating resistnace (?)	Approx. 120	BMS ECU resistance

Inspection

Inspection When removing the battery pack assembly to inspect the battery system, it can be connected to vehicle by using the SST 0K918-E4100, 0K375-E4100, 0K375-E4 ...

Battery Management System (BMS) ECU Schematic Diagrams

System Circuit Diagram Connector Location BMS ECU Connector And Terminal Function BMS ECU Terminal Function A Connector [B01-A] (35 Pin) - Voltage Measurement Connector Pin no.DescriptionCo ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Yaw-rate and Lateral G Sensor Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning to work. 3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors. 4. Remove the floor console. (Refer to Body - "Floor console") 5. ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: General Information

General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Using KIA approved battery tester, check the battery condition. Check the battery for damage and clean / tight connections. (Refer to Engine Electrical System - "Batte ...