Other information:
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant cover (A).
3.
Disconnect the power door mirror connector (A) from the harness.
4.
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
...
Component Location Index
Engine Room
[Without Heat Pump]
1. Receiver-drier2. Condensor3. A/C Pressure Transducer (APT)4. Service port (Low pressure)5. Service port (High pressure)6. Suction & Liquid tube7. Expansion valve8. Suction pipe9. Suction hose10. Electric A/C compressor
[ ...