Other information:
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Open the sunglass case cover from the overhead console then
remove the 2 screws holding the overhead console. Disconnect the switch
connector and Map lamp connector, and then remove the overhead console
lamp (A).
3.
Che ...
Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check voltage if the red light doesn''t flicker.
Standard voltage : 3V
3.
Insert the battery (A) into the tester (09954-2P100).
4.
Pus ...