Other information:
Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the front seat belt buckle connector wiring (A).
3.
After loosening the mounting bolt, remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf. ...
Inspection
Fog Lamp Switch
1.
With the fog lamp switch in each position, make sure that
continuity exists between the following terminals. If continuity is not
as specified, replace the multifunction switch.
Removal
Front Fog Lamp
1.
Disconnect the negative (-) battery terminal.
2. ...