Kia Soul EV: High Voltage Battery Control System / Runaway Arresting Device (RAD) Specifications

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Control System / Runaway Arresting Device (RAD) Specifications

Specification
Item
Specification
Remark
RAD Combined Resistance (?)
Less than 3 (20°C)
Checkable by multi tester
RAD Terminal Resistance (?)
Less than 0.375 (20°C)
Checkable by multi tester
RAD Switch Position
Bottom
RAD switch and visual inspection

Battery Temperature Sensor Repair procedures
Installation     Battery temperature sensor can not be disassembled. 1. Turn the ignition switch OFF. 2. Shut off the high voltage. (Refer to Battery Control Syste ...

Runaway Arresting Device (RAD) Components and Components Location
Components Location 1. Runaway Arresting Device (RAD)2. Runaway Arresting Device (RAD) Wiring Harness ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Stabilizer Bar Repair procedures


Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box. Tightening torque: 32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb-f ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: A/C Pressure Transducer Repair procedures


Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminals No. 1 and No. 2. 2. Inspect the voltage value whether it is within the specified range. Voltage = 0.00878835 * Pressure + 0.5[PSIA] 3. If the measured voltage value is not within t ...

Copyright © www.ksoulev.com 2020-2023