Other information:
Replacement
[Without Heat Pump]
1.
Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser.
Tightening torque :
9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
2.
Remove the desiccant (A) from the condenser using a long
nose plier. Che ...
Troubleshooting
SymptomPossible CauseRemedyLower pedal or spongy pedal1. Integrated Brake Actuation Unit (Air in system)Bleed air2. AHB system (Fluid leaks)Replace3. Piston seals in IBAU (Worn or damaged)ReplaceBrake drag1. Brake pedal free play (Minimum)Adjust2. Pad or lining (Cracked or disto ...