Adjustment
Inspect Glass Alignment
1.
Inspect the alignment of the movable glass (C) that is between the front (A) and rear (B) glass and if needed adjust it.
Alignment adjustment
Standard v ...
Removal
•
In order to remove the front glass, use the tools shown in the following figure:
[Tooling Diagram]
Square wire
Insert-type wire grip
[Tooling ...
Inspection
1.
The SJB can be diagnosed by using the GDS. The SJB
communicates with the GDS which then displays inputs and outputs along
with codes.
It will be able to quickly diagnose defects of hazard lamp
switch with GDS. GDS can forcefully operate actuator, monitor
input/output value ...
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp.
(Refer to Body Electrical - "Overhead Console Lamp")
3.
Remove the hands free mic (A) from the overhead console lamp by loosening the mounting screws.
No.Description1Mic (+)2Mic (-)
...