Kia Soul EV: High Voltage Battery Cooling System / Inlet Temperature Sensor Specifications

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Cooling System / Inlet Temperature Sensor Specifications

Specification

Temperature (°C)	Resistance (K?)	Tolerance (%)
-40	204.5	±4.0
-30	117.8	±3.5
- 20	70.34	±3.0
- 10	43.43	±2.5
0	27.63	±2.0
10	18.07	±1.6
20	12.11	±1.2
30	8.303	±1.2
40	5.813	±1.5
50	4.149	±1.9
60	3.013	±2.2
70	2.225	±2.5

Cooling Duct Repair procedures

Removal Battery Module Outlet Duct • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the hi ...

Inlet Temperature Sensor Description and Operation

Description Inlet temperature sensor is installed on the No.8 module of high voltage battery and it detects the inner air temperature of battery. The operation of cooling fan depends on the inl ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: High Voltage Battery Heater Relay Specifications

Specification ItemSpecificationONRated Voltage (V)450Rated Current (A)10Voltage Drop (V)Less than 0.5 (200A)CoilOperation Voltage (V)12Resistance (?)104.4 ~ 127.6 (20°C) ItemSpecificationNoteHeater Relay Switch Resistance (?)?Checkable by multi testerHeater Relay Operation Sound"Clickin ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Rear Torsion Beam Axle Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) • Be carefu ...