Other information:
Inspection
1.
Check for output signal in the heater and A/C control unit.
2.
Using the GDS, check whether there is a problem in the interlock.
3.
Check whether the low voltage (12V) is supplied or not.
4.
For inspection, refer to the Self Diagnosis and Fail Safe.
Replacement
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminals "1" and "2" of the evaporator temperature sensor.
4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn ...