Other information:
Components Location
High Voltage Battery System Assembly
1. BMS ECU2. Main Relay 3. Pre Charge Relay4. Pre Charge Resistor5. Battery Current Sensor6. Safety Plug7. Main Fuse8. Battery Temperature Sensor9. Runaway Arresting Device (RAD)10. High Voltage Battery Heater (With heater system)11. ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the negative (-) battery terminal.
3.
Verify that the auto defogging actuator operates to the open
position when 12V is connected to terminal 3 and ground to terminal 4.
Verify that the auto defogging actuator operates to the c ...