Kia Soul EV: High Voltage Battery Control System / Pre-charge Relay Specifications

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Control System / Pre-charge Relay Specifications

Specification
Item
Specification
ON
Rated Voltage(V)
450
Rated Ampere(A)
10
Voltage Drop(V)
Less than 0.5 (10A)
Coil
Operation Voltage(V)
12
Resistance(?)
104.4 ~ 127.6 (20°C)

Item
Specification
Remark
Main Relay Switch (-) Resistance (?)
?
Checkable by multi tester
Pre Charger Relay Operation Sound
"Clicking"
Checkable by GDS and SST
Pre Charger Relay Coil Resistance (?)
104.4 ~ 127.6 (20°C)
Checkable by multi tester

Main Relay Repair procedures
Inspection     • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failur ...

Pre-charge Relay Description and Operation
Description Installed in the Power Relay Assembly (PRA), the Pre-charge Relay connects high voltage circuit when pre-charging the inverter capacitor. When the IG is ON, the current coming thro ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: License Plate Lamps Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license plate lamp assembly (A). 3. Replace the bulb (B) after removing the license plate lamp (A). Installation 1. Install the bulb. 2. Install the license plate lamp assembly. ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Stabilizer Bar Repair procedures


Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box. Tightening torque: 32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb-f ...

Copyright © www.ksoulev.com 2020-2022