Other information:
Inspection
1.
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
No.Description1Ground (-)2Door (-)3Room/ Door (-)4Battery (+)
Removal
1.
Disconnect the negative (-) battery term ...
Replacement
•
When removing and installing the hood lifter, work in a group of two or more.
•
When removing the clips, use a clip remover.
1.
Using a screwdriver (A), lift the socket clips (B) up
slightly on both ends of the lifter (D), a ...