Other information:
   Inspection
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Prcedure")
3.
Remove the high voltage battery system assembly.
(Refer to High Voltage Battery System - Repair procedures - "Removal")
4.
Remove the hi ...
   
   Description
Pre-Charge Resistor is installed in the Power Relay Assembly 
(PRA) and it protects the high voltage circuit by limiting the charging 
current when the inverter capacitor is being pre-charged.
[With High Voltage Battery Heater System]
1. Main Relay (+)2. Main Relay (-)3. Pre Cha ...