Replacement
•
Be sure to read and follow the “General Safety Information
and Caution” before doing any work related with the high voltage
system. Failu ...
Inspection
1.
Check for output signal in the heater and A/C control unit.
2.
Using the GDS, check whether there is a problem in the interlock.
3.
Check whether the low voltage (12V) is sup ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminals "1" and "2" of the evaporator temperature sensor.
4.
Connect the evaporator temperature sensor connector.
5.
Run the engine and turn ...