Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of the ambient temperature sensor
between terminals 1 and 2 whether it is changed by changing of the
ambient temperature.
1. Sensor Ground2. Ambient Sensor Signal
Speci ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the luggage lamp (A).
3.
Remove the luggage lamp (A) after disconnecting the connector (B).
Installation
1.
Install the luggage lamp assembly after connecting the lamp connector. ...