Other information:
Replacement
•
When installing the belt, be careful not to damage the retractor.
1.
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
2.
Loosen the rear seat belt upper anchor (A) mounting bolt.
3.
After loosening the ...
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Using KIA approved battery tester, check the battery condition. Check the battery for damage and clean / tight connections.
(Refer to Engine Electrical System - "Batte ...