Other information:
Operation Condition
1.
The power supplied to the PTC heater should be within DC 240V - 420V (high voltage).
2.
The power supplied to the PTC heater should be within 9.0V - 16.0V (low voltage).
3.
The interlcok and insulation resistance must be normal.
4.
The engine must be running.
...
Removal
Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery
Current Sensor, High Voltage Battery Heater Relay and the High Voltage
Battery Heater Fuse are integrated in the Power Relay Assembly (PRA). So
Refer to the removal procedure of Power Relay Assem ...