Other information:
Replacement
[Without Heat Pump]
1.
Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser.
Tightening torque :
9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
2.
Remove the desiccant (A) from the condenser using a long
nose plier. Che ...
Components
[A/T]
1. Console rear cover assembly2. Floor console assembly3. EPB switch assembly4. Wiring assembly5. Cup Hold assembly6. Console side pad [LH]7. Console side pad [RH]8. Supplement cup hold9. Ashtray10. Floor console mat11. Console storage box12. Hole cover
...