Kia Soul EV: Rear Suspension System / Rear Torsion Beam Axle Components and Components Location

Rear Coil Spring Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ ...

Rear Torsion Beam Axle Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Components and Components Location

Components 1. TPMS Receiver2. TPMS Sensor (FL)3. TPMS Sensor (RL)4. TPMS Sensor (RR)5. TPMS Sensor (FR) ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Wheel Repair procedures

Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, final tightening torque should be checked using a torque wrench. Run out inspection 1. Jack up the ...