Other information:
Removal
Rear Combination Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear combination lamp (A) after loosening the mounting screws.
3.
Disconnect the rear combination lamp connector (A).
Turn Signal Lamp Bulb
1.
Disconnect the negative (-) battery terminal.
...
Components Location
High Voltage Battery System Assembly
1. BMS ECU2. Main Relay 3. Pre Charge Relay4. Pre Charge Resistor5. Battery Current Sensor6. Safety Plug7. Main Fuse8. Battery Temperature Sensor9. Runaway Arresting Device (RAD)10. High Voltage Battery Heater (With heater system)11. ...