Kia Soul EV: SRSCM / Side Impact Sensor (SIS) Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation

Description

Side Impact Sensor (SIS) system consists of two P-SIS, installed at each center of front door modules (LH and RH), and two SIS, installed at each center of nearby pillars (LH and RH).

P-SIS or Pressure Side Impact Sensor detects pressure due to collision at its mounting location..

Side Impact Sensor is also called A-SIS as it detects acceleration.

SRSCM determines the deployment of airbag and the time of deployment based on the collision signal from the SIS at the time of collision.

Front Impact Sensor (FIS) Repair procedures

Removal • Removal of the airbag must be performed according to the precautions / procedures described previously. • Before disconnecting the front ...

Side Impact Sensor (SIS) Components and Components Location

Components ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Chiller Repair procedures

Replacement 1. Recover the refrigerant with a recovery/ recycling/ charging station. • Do not use the same A/C recovery / charging station as conventional belt-driven compressors. • Since the electric compressor uses high-voltage, POE oil with ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: A/C Pressure Transducer Description and Operation

Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. Engine ECU converts the voltage value to control the cooling fan by operating it in high speed or low speed. Engine ECU stops the operation of the compres ...